12.25

CHANNEL EQ EQUALIZER1244
LMF Gain
The low medium frequency EQ is fully parametric.
D Set the LMF Gain/Attenuation amount.
Range: +/- 20 dB
LMF Frequency
D Set the LMF (center) Frequency.
Range: 200 Hz - 2 kHz
LMF Q
The “Q” parameter adjusts the bandwidth around the set center LMF Frequency. The higher the Q value, the narrower
the affected frequency range - except in “E” mode (see “E Mode”).
D Set the Q value for the LMF EQ.
Range: 0.70 - 2.50
E Mode
D Click to switch to E Mode.
When the E Mode button is activated the EQ will have slightly different curve characteristics. In normal mode (E
button deactivated), the Gain setting will also affect the bandwidth (Q value) for the LMF and HMF EQs. The
higher the Gain, the narrower the bandwidth and vice versa.
With E Mode activated, the bandwidth is constant at all Gain settings.
HMF Gain
The high medium frequency EQ is fully parametric.
D Set the LMF Gain/Attenuation amount.
Range: +/- 20 dB
HMF Frequency
D Set the HMF (center) Frequency.
Range: 600 Hz - 7 kHz
HMF Q
The “Q” parameter adjusts the bandwidth around the set center HMF Frequency. The higher the Q value, the nar-
rower the affected frequency range - except in “E” mode (see “E Mode”).
D Set the Q value for the LMF EQ.
Range: 0.70 - 2.50
HF Gain
The HF section provides high frequency shelving equalization. Frequencies above the set corner Frequency will be
cut or boosted by the set HF Gain amount.
D Set the HF Gain/Attenuation amount.
Range: +/- 20 dB