12.25

MIDI OUT DEVICE1091
Using the ReGroove Mixer for MIDI latency compensation
If you are experiencing MIDI latency when playing back recorded MIDI notes to your external instrument, you can
compensate for this by using the Slide function in the ReGroove Mixer. This way you won’t have to move or nudge the
note clip(s) back before recording your external instrument onto an audio track in Reason.
1. Set up your external instrument according to the descriptions in steps 1-4 in “Audio recording of MIDI con-
trolled external instruments”.
2. Make sure the Monitor button on the audio track is on.
3. Assign a ReGroove channel to the MIDI Out Device track.
In this example we use ReGroove channel A1.
4. Make sure Click is on in the sequencer.
5. Play back the song and turn the Slide knob in channel A1 of the ReGroove Mixer counter-clockwise until your
external instrument plays back in sync with the sequencer click.
! Note that the Ticks value you set with the Slide knob is tempo dependent. This means that if you raise the
Tempo in the sequencer you will have to set the Slide knob to a lower (more negative) value to maintain the
sync - and vice versa.