12.25

MIDI OUT DEVICE1087
Modulating MIDI Controllers from CV signals
The MIDI Out Device features eight CV inputs for routing modulation signals from the rack to MIDI CC# of your
choice.
1. Flip the rack around and connect some modulation sources to the desired CV inputs:
2. Flip the rack back to the front and click the On button to activate the CV IN section:
CV signals routed to any of the four CV IN pairs are indicated by lit LEDs:
3. Click to select which CV IN pair to edit:
4. Drag up/down to select the desired MIDI CC# to route the CV modulation signals to:
5. Turn the Scale knobs to change the modulation range, from static (0-0) to full (0-127):
6. Turn the Offset knobs to change the modulation offset (0-127):
The modulation level(s) are shown in the CC Output displays:
7. Repeat steps 3-6 to assign and set up the other CV IN pairs.