12.25

HUMANA VOCAL ENSEMBLE1003
Connections
! Remember that CV connections are NOT stored in the Humana patches! If you want to store CV connections
between devices, put them in a Combinator device and save the Combi patch.
Sequencer Control inputs
The Sequencer Control CV and Gate inputs allow you to play Humana from another CV/Gate device (typically a Ma-
trix or an RPG-8). The signal to the CV input controls the note pitch, while the signal to the Gate input delivers note
on/off along with velocity. There are also inputs for modulating the Pitch Bend and Mod Wheel parameters.
Modulation Inputs
These control voltage (CV) inputs can be used for modulating the Filter Cutoff and Resonance parameters, as well as
the Master Volume level.
Audio Out
These are the main audio outputs. When you create a new Humana device, these outputs are auto-routed to the first
available Mix Channel in the Reason main mixer. If there is no Mix Channel available, a new one will be automatically
created.