12.25

HUMANA VOCAL ENSEMBLE1002
Time
D Set the reverberation duration time.
In practice this sets the “size” of the reverberation “chamber/room/hall”.
Pre-Delay
D Set the pre-delay time of the reverb.
Range: 0-200 ms.
Hi Damp
D Raise the Hi Damp value to cut off the high frequencies of the reverb and thereby create a smoother, warmer
effect.
Lo Damp
D Raise the Lo Damp value to cut off the low frequencies of the reverb signal, to make the reverb effect less
“muddy”.
Amount
D Set the reverb amount with the Amount knob.
Note that the Reverb effect is routed as a “send effect”, with the Amount knob working as an “effect return” con-
trol. This means that if you play a short note with the Amount knob set to zero, you might still get a reverb effect if
you turn up the Amount afterwards (depending on the Time setting, see “Time”).