10.0

EUROPA SHAPESHIFTING SYNTHESIZER
718
Drive
D Turn the Drive knob to amplify and introduce an overdrive type of distortion to the Sound Engine signal(s)
in the filter.
Filter Type selector
D Click the Filter Type name box to select one of the following filter types:
• SVF HP 12dB
A state variable (SVF) highpass filter with a 12dB/octave slope. This filter is similar to the State Variable Filter in
the Thor synthesizer.
• SVF BP 12dB
A state variable (SVF) bandpass filter with 12dB/octave slopes. This filter is similar to the State Variable Filter in
the Thor synthesizer.
• SVF LP 12dB
A state variable (SVF) lowpass filter with a 12dB/octave slope. This filter is similar to the State Variable Filter in
the Thor synthesizer.
•SVF Notch
A state variable (SVF) notch filter. This filter is similar to the State Variable Filter in the Thor synthesizer.
• Ladder LP 24dB
A ladder-type lowpass filter with a 24dB/octave slope. The resonance peak more narrow in this filter type than in
the MFB LP 24dB filter (see below). The filter can be driven to self-oscillate.
! Be careful when using this filter type as high Resonance values could generate quite extreme audio levels!
•MFB LP 12dB
A multiple feedback (MFB) lowpass filter with a 12dB/octave slope.
•MFB LP 24dB
A multiple feedback (MFB) lowpass filter with a 24dB/octave slope. The resonance peak is wider in this filter type
that in the Ladder filter (see above). The filter can be driven to self-oscillate.
! Be careful when using this filter type as high Resonance values could generate quite extreme audio levels!
•MFB HP 24dB
A multiple feedback (MFB) highpass filter with a 24dB/octave slope.
! Be careful when using this filter type as high Resonance values could generate quite extreme audio levels!
• K35 LP 12dB
An “early MS-20 type” of lowpass filter with a 12dB/octave slope. The filter can be driven to self-oscillate.
! Be careful when using this filter type as high Resonance values could generate quite extreme audio levels!
Reso
D Set the resonance amount.
In the SVF Notch filter, the Reso knob controls the width of the notch - from wide to narrow.
Freq
D Set the cutoff frequency (for the HP and LP filter types) or the center frequency (for the BP filter type).