10.0

EUROPA SHAPESHIFTING SYNTHESIZER
712
• FM > FM Ratio (1:1, 1:2, 1:8, 2:1)
These modifiers let you frequency modulate the currently selected Waveform at various ratios. The carrier signal is
the currently selected Waveform (C: ) and the modulator ( :M) is the modifier signal. Set the frequency modulation
amount with the Amount knob.
• FM > FM Feedback
Here, an internally fed back sinewave signal at an 1:1 ratio modulates the waveform (same signal type as in the
“FM > FM Feedback” Waveform).
• Detuning > Unison3
This simulates 2 copies of the original signal. The Amount knob controls the detuning amount and rate.
• Detuning > Unison7
This simulates 6 copies of the original signal. The Amount knob controls the detuning amount and rate.
• Detuning > Ensemble
This simulates a variable number of copies of the original signal. The Amount knob controls the number of copies,
the detuning amount and rate.
• Detuning > Unison 3Oct
This simulates 2 copies of the original signal at +1 and +2 octaves relative to the original signal. The Amount knob
controls the detuning amount and rate.
Amount
D Turn the Amount knob to change the modification amount of the currently selected Modifier.
The wave shapes are updated in real-time and shown in the Waveform display.
Amount Modulation
D Click the Modulation Source box to bring up a menu of the available modulation sources.
The “Inverted” sub-menu contains inverted variations of all modulation sources.
D Set the modulation amount with the Amount Modulation knob.
q If you want other modulation sources or scaling options, use the Mod Bus, see “The Modulation Bus section”.
The Spectral Filter
The signal from the Oscillator section can then be processed by the Spectral Filter. The Spectral Filter features a
wide variety of algorithms that affect the partials of the signal.
Spectral Filter On/Off
D Click the On/Off LED button to activate/deactivate the Spectral Filter.