Installation & Assembly

Page 19
Step 4 –Locate the Spring Loops on the
underside of the Pad. Find the Spring
nearest to the Spring Loop and unhook
it from the Frame. Insert the Spring
through the Spring Loop, and reattach it
to the Frame. Repeat this step until all
Spring Loops have been attached.
Step 5 – Lift the Enclosure Poles and insert them through the hole in the Pad and into the T-
Bracket slot.
Step 6 – Secure the Enclosure Poles to the Frame by
attaching the included bolts through the T-Brackets.
NOTE: Foam Sleeves covering the Enclosure Poles may require a few warm days to fully
return to their original round shapes after being flattened during the shipping process.
Similarly, any folds or creases in the Pad, Mat, or Enclosure should disappear within a
short time.
Make sure that all parts are securely attached. Familiarize
yourself and all users of the Trampoline and Enclosure
Combination with all safety precautions, use and
instructional materials, and the care and maintenance instructions in
this manual before using the Trampoline and Enclosure Combination.