Installation & Assembly

Page 17
Step 8 – Work your way
around the Trampoline
attaching a Spring on both sides
of each Enclosure Pole.
Remember to slide the end of
the spring through the
enclosure slot before attaching
it to the V-Ring on the Mat As
the Enclosure can bunch up,
you will need to count the V-
Rings on the Mat, and the
Spring Slots in the Enclosure
and the Frame, to ensure that
the Enclosure is evenly
stretched, and that you are
attaching the Spring in the
correct location.
Step 9 – Work your way
around the Trampoline
attaching one Spring to the
right of each Spring that is already attached. Continue this step until all Springs are attached.
Attaching the Springs one-by-one as directed will prevent damage caused by overstretching
during assembly.