Installation & Assembly

Page 16
Step 7 – Your Enclosure should
now be hanging loosely from the
Enclosure Poles, with the
Zippered Opening centered
between two Enclosure Poles on
the short side of the trampoline.
Locate red threads sewn at four
locations along the lower edge of
the enclosure. These threads mark
the corners of your trampoline.
Attach the 2 springs on both sides
of each red thread. To attach a
spring, feed the short end of a
Spring through the slit in band on
the enclosure and attach to the V-
Ring on the mat. (See
illustrations.)