Owners manual

Page 22
Finally attach the slide to the ladder. Slide the Slide Support Bar (22) into the two grooves
under the slide. Set the slide and support bars onto the ladder and line up the holes on each
side. Fasten the slide to the ladder using the 1/4” x 2” Bolt for Slide Rail (25), 1/4” Washer
(59), and 1/4” Cap Nut for the Slide Rail (63). Repeat for both Slide Bars.
Your swing set assembly is complete. Make sure that all
parts are securely attached. Familiarize yourself and all users
of the swing set with all safety precautions. Use the
instructions, care, and maintenance materials in this manual before
using the swing set.
Your swing set is now fully assembled.