Owners manual

Page 21
Attach the Ladder Legs (21) to the ladder braces by inserting them into the ladder brace and
then attaching them with 1/4”x 11/16” Bolt (62) and the 1/4” Thru Nut (60).
Attach the ladder to the main frame by lining up the holes on the Ladder Brace with the
holes on the Leg Brace for the ladder that is attached to the swing set legs. Insert the 1/4” x
2-3/4” Bolt (42) into the holes on the frame Leg Brace. Then slide the Ladder Spacer (49)
onto the bolts. Then put the ladder brace on the bolts. Tighten to the brace using a 1/4”
Washer (59) and 1/4” Cap Nut (63).