Owners manual

Page 19
Finally attach the Teeter Totter Foot Rest (27) to the bottom of the braces. Use the 1/4”
x 3/4” Screws (50) to screw them to the braces.
Step 6 – Assembling the slide. Put the Slide Bottom B (16) on the right side of the bottom
piece (the bottom piece has the rectangular posts and round posts).
Slide the upper slide into the groove on the bottom piece, and then put the Slide Rail (14)
on it. Then put the Slide Side Rail A (17) on the very top piece. Attach all the side rails with
the Slide Plugs (37). Screw them on with a screwdriver.
In the bottom hole on the Slide Bottom insert the Slide Bottom Rail Bar (23) and fasten
to the slide bottom with the Slide Plugs (37).