Owners manual

Page 18
Insert 2, 5/16” x 1/2" Brace Spacers (52) into the sides of the Teeter Totter Seats
Supports (68). Align the brace spacer and Teeter Totter Seat Supports with the holes on the
Teeter Totter Brace. Fasten the supports to the brace by inserting the J bolt (45) into the
support bar with two holes and then insert the 1/4” Thru Nut (60) thru the other side. Loosely
tighten.
Attach the Teeter Totter Seat (28) to each end of the support bars. Attach them with the
1/4” x 1-3/8” Carriage bolt (43), 1/4” Washer (59), and 1/4” Cap Nut (63).