Owners manual

Page 16
Finally attach the Carriage Seat (36) to the Carriage Arm Rests. Use 1/4” x 1-1/5” Bolt
(41) and 1/4” Washer (59) to bolt them to the arm rests.
Step 5 – Attaching and Assembling the Teeter Totter. First attach the Teeter Totter
Bracket (26) to the single square crimp on Top Rail D. Do this by putting Teeter Totter
Bracket (26) on the bottom side of the frame, then fasten it on with the Teeter Totter Top
Bracket (29), 5/16” x 1” Bolt (46), Teeter Totter Bracket Washer (65) and, the 5/16” Nylon
Nut (61). (The Bracket Washer goes on before the Nut.)