Owners manual

Page 12
Step 8 – Install End Cap (57). With the Frame assembled insert End Cap (57) into the
ends of Top Rail A and Top Rail D (make sure it is pushed in as far as it will go).
Accessory Assembly
Read and understand all assembly instructions before beginning the assembly process.
Step 1 – Attaching the swings. First insert one end of the Swing Seat Chain (66) into the
swing seat (33). Fasten it to the seat by using 5/16” Washer (64), 5/16” Nylon Nut (61) and
a cap (47). Repeat this for the other side and swing seat. Then attach the other end into the
rectangle punched slots on Top Rails A, B, and C. Use a 5/16” Curved Washer (55), cap
(47), and a 5/16” Nylon Nut (61) to attach it to the top rails.