Owners manual

Page 10
Step 5 – Bolt on the Angled Leg Brackets (1) and the Straight Leg Bracket (2). Use 5/16”
x 2” Bolt (39) with 5/16” Curved washer (55). Use 5/16” Thru Nut (58) with 2/5” Curved
Washer (54) to fasten the leg braces to the frame. Repeat this step on the other angled leg
brace and the straight leg brace.
Step 6 – Attach the Upper Frame Leg (10) to the top frame. Slide a Upper Frame Leg
(10) into a Leg Bracket. Align the holes. In the top holes (that are closest to the Top Rails)
insert 5/16’ x 2” Bolt (39) with a 5/16” Curved washer (55) thru a Frame Leg Bracket
Brace (4), and then feed it through the leg bracket and leg. On the opposite side feed
another thru a Frame Leg Bracket Brace (4), screw on a 5/16” Thru Nut (58) with a 2/5”
Curved Washer (54) on it. Repeat this step on the remaining Upper Frame Legs. Loosely
tighten the hardware.