Owners manual

5 | P a g e
Step 3 – Unfold the Shade
Cover. Pull the Shade Cover
over the entire enclosure,
poles, and trampoline.
Step 4 – Lift each Enclosure Pole and Shade Cover upright. (Make sure the
Curved Section of the enclosure pole is facing outward). Insert the bottom end of
the Post into its corresponding T-Bracket Slot. This will allow the Enclosure and
Shade Cover to be completely erected from ground level. DO NOT use any other
method of assembly as it may result in personal injury and/or damage to the
trampoline and clubhouse. Repeat this process for the remaining Upright Posts.