Propel XWing Manual

11
2 SECOND PUSH
ON/OFF
All liGhTS
flAShiNG
REd
CONTROLLER POWER ON/OFF
SYNC TO SHIP: FOR SINGLEPERSON PLAY
Important! When syncing your ship with the con-
troller, always check that the ship is on a at level
surface. This ensures that the 6-axis gyro is prop-
erly calibrated. Your ship utilizes an automatic 2.4
GHz channel selection system that allows up to
12 people to y side-by-side in the same wireless
range with no interference.
Hold button for 2 seconds and the power will turn
on, followed by a slight vibration. All LEDs (life
LEDs and speed LEDs) will ash red until the con-
troller is synced to the ship.
Hold button for 2 seconds and the power will turn
o. The vibration motor will spin and all LEDs will
ash red for 3 seconds.
Push the left control stick all the way up until you
hear 1 beep, then push the stick all the way down.
You will hear 2 beeps to indicate the controller is
synced. Once synced, the LEDs surrounding the
power button will illuminate to indicate the select-
ed speed.
At this point you may want to listen to the open-
ing soundtrack that plays after your controller
powers on, while you continue reading.
AT
ThiS
POiNT
yOU
mAy
ChOOSE
TO
liSTEN
TO
ThE
OPENiNG
SOUNdTRACk
ThAT
PlAyS
whEN
yOU
POwER
ON
yOUR
CONTROllER
,
whilST
yOU
CONTiNUE
REAdiNG
ThiS
hANdbOOk
.
WARNING!
Do not fly your ship in foul weather!