SDS

Safety Data Sheet – ProPEAT 7-4-14

Appearance Dark Brown
Odor Slight sulfur
Odor threshold Not available
pH Not available
Melting point / freezing point Not available
Initial boiling point and boiling range Not available
Flash Point Not available
Evaporation rate (Ether = 1) Not available
Flammability (solid, gas) Noncombustible
Upper/lower flammability or explosive limits
Lower Explosive Limit Not available
Upper Explosive Limit Not available
Vapor pressure (Pa) 0.00001 hPa estimated
Vapor Density Not available
Relative Density Not available
Specific Gravity Not available
Solubility in Water Not available
Partition coefficient n-octanol/water (Log Kow) Not available
Auto-ignition temperature Not available
Decomposition temperature Not available
Viscosity (cSt) Not available
Other information
Percent volatile 0% estimated
pH in aqueous solution Not available
Pounds per cubic foot
Reactivity: Stable and non-reactive under normal conditions of
use, storage and transport.
Chemical stability: Stable under normal circumstances.
Possibility of hazardous reactions: Hazardous polymerization will not occur.
Conditions to avoid: Avoid contact with incompatible materials.
Incompatible materials:
Contact with brass or strong oxidizing agents.
Hazardous decomposition products: Thermal degradation at high temperatures above
575° C (1067° F) may produce sulfur trioxide.
SECTION 10: STABILITY AND REACTIVITY
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES