Installation Guide

3
PROOX
FREESTANDING TUB FAUCET
6. Connect the braided water lines to the main water

hot and cold lines appropriately. Apply thread sealant or
plumber’s tape to the threads before attaching. Hand

wrench. Be careful not to overtighten.

there are no leaks. Once you have determined that

continue with the installation.
5. Remove the nuts, locking washers, and metal washer
from each of the mounting screws. Drop each of the
screws and anchors into the drilled pilot holes, with the


washers, locking washers, and nuts that were removed

conceal the mounting hardware and rough-in.
Threading Facing Up
ON
OFF