Installation Guide

1. When you open the product packaging, please check the product and accessories at first.
If there are any discrepancies, please contact us promptly. We will provide you with a
satisfactory solution.
2. The hot and cold water supply pipe of the valve must be properly connected. When facing the
front of the valve, the hot water supply is on the left and cold water supply is on the right.
Incorrect connection will cause permanent damage to the cartridge.
3. If the accessories to be changed without affecting the use, we will not make a prior notice.
4. The impurities in the water supply pipe must be cleared before installation to avoid blockage.
5. The water pressure of the faucet is 0.05MPa-1.0MPa(including cold water and hot water
Pressure). Applicable water temperature range:39°F-194°F.
CARE INSTRUCTIONS
DO NOT:
Firmly hand tighten the hose
to the valve and add a quarter
turn using the proper wrench
Tighten more if needed
CONNECTION ADVICE
Plumber's
putty
Thread seal
tape
Included
2、PREPARATION BEFORE INSTALLATION
1、INSTALLATION PRECAUTIONS
3 CONCEALED FAUCET ACCESSORIES LIST、
* Apply plumber'
CH/BN/MB/BG/ORB
Cust omer Service
Email: prooxus
@gmail.com
s
putty under the plastic
cover deck plcta to seal
your installation.
*The model shown in
the installation steps
may differ from the one
in box however
connection type and
installation steps are
the same.
No. Description
A
B
C
D
E
F
G
H
I
J
K
Shower Support
Anchor
Mounting Screw
Mounting Bracket
Escutcheon
Shower Head
Shower hand
Diverter
Shower Boby
Stainless Steel Hose
S-Connector
Ri ns e the p r od uc t wit h clea r wat er . Dry t he
pr od uc t wi th a sof t clo t h.
Use abrasive cleansers, cloths, or paper towels. Use
any cleaning agents containing acid, polish, wax,
alcohol ammonia, bleach, solvent or any other
corrosive or harsh cheminalc cleansers.
B
A
F
G
J
K
H
I
E
C
D
E
ＰＲＯＯＸ ＥＸＰＯＳＥＤ ＰＩＰＥ ＳＨＯＷ ＥＲ Ｗ ＩＴＨ ＨＡ Ｎ Ｄ ＳＨＯＷ ＥＲ
INSTALLATION INSTRUCTION