Installation Guide

INSTALLATION STEPS
INSTALLATION WAY
1
COPPER
DRILLING GUIDE
ATTENTION
1
43
7
5
WHEN USING A
HANDSHOWER,
IT NEEDS TO
BE CONNECTED
TO THE TOP
OUTLET
COLD WATERHOT WATER
2
2
3
4
We recommends using a professional
plumber for all installtion and repair.
Please inform yourself about the canadian
plumbing code`s regulations and your
local municipality plumbing codes before
instaillation.the canadian plumbing code
requires the installation of urge arresting
devices to eliminate water
hammering.allow an adequate opening in
orderto easilyaccess connections or other
plumbing devicesfor maintenance or
repair.
* Apply plumber's putty
under the plastic cover
deck plcta to seal your
installation.
The model shown in the
installation steps may differ
from the one in box however
connection type and
installation steps are the
same.
RECOMMENDED TOOLS
Plumber's
putty
Thread seal
tape
Included
BEFORE YOU BEGIN
Firmly hand tighten the hose
to the valve and add a quarter
turn using the proper wrench
Tighten more if needed
CONNECTION ADVICE
HOT
COLD
COPPER
HEAD SHOWER
6