Installation Guide

1 2
3
Ø30-Ø33Max
Base
B
3
A
4
5
2
1
1.Make sure there is a Ø30-Ø33 Hole on the basin before fix
the mixer, Unscrew the fitting ASSY from the bottom of the
body, then get the body through the hole, don't forget to fix
the o-ring between the bottom of the body and the basin.
2.According the remove step to screw up the fixing set to
the mixer below the basin.Use hand to screw up the
locknut,then use install tool for fixing strengthen.
3.Connect the inlet hose from the body,"Red" for
connecting to the hot water,and "Blue" for connecting
to the cold water.
6
Hose
Instruction
6
1