Operation Manual

Level of protection
The indication for the degree of protection contains the character ‘IP’ (International
Protection) followed by two or three digits that stipulates the conditions that it
complies with.
The first digit refers to the class of protection for density, the second digit to the fluid
density and the last digit refers to the impact resistance. The GBC 100 can be
assigned IP 205, which means:
2 = the charger is protected against solid particulate larger than 12mm.
0 = the charger is not protected against water/liquid etc.
5 = the charger can bear a n impact force of 2.00 Joule (2Nm) max.
Important
Protect the charger against moisture, pollution etc. This can be sucked in by the
fan en will damage the charger internally. The cost for this repair is not covered
by warranty.
LED INDICATION
LED ‘float/boost’ lights on - red : bulk charge and equalizing
- green: battery is full, floatcharging
LED ‘error’ lights on - red : reverse polarisation
LED ‘on/power’ lights on - red : the charger is switched on
9