CDMA FWT-8848 User's Manual Version 1.1 CDMA FWT-8848 (Gateway Gateway)) User's Manual CDMA FWT-8848 Version 1.
CDMA FWT-8848 User's Manual Version 1.1 1,General Description CDMA FWT-8848 is a CDMA to Analog Converter(single port,insert 1 Ruim card only), the device can produce a FXS line to allow a regular phone to be connected and used just like a local landline(PSTN) except your calls will go out the CDMA network. This device can both receive and make calls.
CDMA FWT-8848 User's Manual Front side Rear side Bottom side Version 1.1 LEDs display for Signal strength, Power, Working Status,Talking and Battery indicator; 1pcs SMA antenna connectors, 2 RJ-11 output,Power port and switch; 1pcs Ruim card holder slots, you can insert Ruim card into the slot . atures: 2,Fe 2,Features: 1) It is a 1 channel CDMA converter which has 2 RJ-11 outputs for extensions; 2) It can connect with ordinary telephone set, PBX , VOIP Gateway, Billing meter etc.
CDMA FWT-8848 User's Manual Version 1.1 Color: White /Black (optional) AC-Adapter interface: Input: AC 110~240VAC 50~60Hz Output: 12DC 1A. AC-Adapter type: EU,US,AU,British can be optional Operation Circumstance: 4, 4,Operation Operation temperature: -10c~60C Storage temperature:-20C~70C Operation humidity:45%-95% Atmosphere pressure:86-106Kpa Environment noise: <60DB Transmitting Power:2W Sensitivity: <-104dbm Antenna Amplifying: >2.
CDMA FWT-8848 User's Manual Version 1.1 The Sketch for connecting ordinary Telephone Draw your attention: Because there are many types of ordinary telephone and their electric parameters are different. In order to avoid mutual disturbance between telephone and terminal and affect voice quality. The distance between telephone and terminal is 1.5m at least.
CDMA FWT-8848 User's Manual Version 1.1 4) The installation for connecting VoIP gateway for Call Termination Suppose a VoIP call originates from US, which was transferred from US Server to China Server on VoIP, finally the call will be terminated from internet to CDMA network and to be sent out to the destination answer side.
CDMA FWT-8848 User's Manual Version 1.1 7, Function Setting Before you do the following function settings, Lift handset or press hands free key of telephone set, then you can press the buttons according to the following instructions to finish setting, you will hear 2 beeps when you finish, this testify setting successfully. 1) Restore to factory default setting *#99#99# restore to factory default setting. 2) Adjust dial interval *#01#30# , 01--command，30--time，Max 9.9 seconds，Min 0.
CDMA FWT-8848 User's Manual *#05#17911# Version 1.1 05--command，17911—IP numbers，Max 5 numbers, use "*" instead if IP number is less than 5 digit. Hide Caller ID (been sent out) Setting (optional) 7）Hide out)Setting *#13#01# 13--command，01--value，Max-02，Min-00 Default setting is 00 00-- presentation indicator is used according to the subscription of the CLIR service 01 – CLIR allowed 02 – CLIR prohibited Notice: This Setting need CDMA carrier support.
CDMA FWT-8848 User's Manual Version 1.1 Warranty Card Please fill in the blanks carefully, and keep it properly as the voucher for warranty. Type of Equipment CDMA FWT-8848 User’s name Contact with: Contact Tel.no.
