GSM&PSTN FWT-8848 User's Manual Version 1.1 GSM&PSTN FWT-8848 (Gateway) User's Manual GSM&PSTN FWT-8848 Version 1.
GSM&PSTN FWT-8848 User's Manual Version 1.1 1, General Description GSM+PSTN fwt with LCR has the function to choose route automatically. When you dial from GSM+PSTN fwt, it will check the prefix no. you preset into device. Then it will call out through GSM or PSTN according to your presetting rules. And GSM /PSTN both support call in. When you are in the phone call through GSM, and at the same time, another phone call to pstn line, the caller will hear busy tone. And vice versa.
GSM&PSTN FWT-8848 User's Manual Front side Rear side Bottom side Version 1.1 LEDs display for Signal strength, Power, Working Status, Talking and Battery indicator; 1pcs SMA antenna connectors, 2 RJ-11 output, Power port and switch; 1pcs Sim card holder slots, you can insert Sim card into the slot . 2, Features: 1) Auto-select economic route (Low cost routing-LCR function) 2) GSM isn't ready, call will be forced to dial out from PSTN.
GSM&PSTN FWT-8848 User's Manual Version 1.1 Dialing tone Frequency: 450Hz Antenna interface: Antenna amplifying>2.5db Sensitivity:<-104DBM Transmitting power<3W Color: White /Black (optional) AC-Adapter interface: Input: AC 110~240VAC 50~60Hz Output: 12DC 1A.
GSM&PSTN FWT-8848 User's Manual Version 1.1 telephone and terminal. 3. On end of the telephone line connects to the “Phone” port of the terminal, the other end connects to telephone. 4. “Power” port connects to power adapter that is connected to 110-220V AC power supply. The Installation for Connecting to PSTN &Ordinary Telephone The Sketch for connecting to PSTN And Ordinary Telephone set.
GSM&PSTN FWT-8848 User's Manual Version 1.1 Default setting: *#21#01*1##### *#21#02*2##### *#21#03*3##### *#21#04*4##### *#21#05*5##### *#21#06*6##### *#21#07*7##### *#21#08*8##### *#21#09*9##### *#21#10*00#### Default setting: Prefix 1 to 9 and 00 numbers call out through PSTN. Other numbers call out through GSM. II) Other Optional Function Setting 1) Restore to factory default setting *#99#99# restore to factory default setting. 2) Adjust dial interval *#01#30# , 01--command 30--time Max 9.
GSM&PSTN FWT-8848 User's Manual ） Version 1.1 7 Hide Caller ID (been sent out)Setting *#13#01# 13--command 01--value Max-02 Min-00 Default setting is 00 00-- presentation indicator is used according to the subscription of the CLIR service 01 – CLIR allowed 02 – CLIR prohibited Notice: This Setting needs GSM carrier support.
GSM&PSTN FWT-8848 User's Manual Version 1.1 2) Network Lock 1, Set to open Network lock function *#10#01234# 10-command, 01234-password 2, Set to close Network lock function *#11#01234# 11-command, 01234-password 3, Set the Network codes *#12#1*46003*46003# 12-command, 1--No. Of IMSI, 46003--the IMSI code for China Telecom *#12#2*46000*46000# 12-command, 2--No. Of IMSI, 46000--the IMSI code for China Mobile 8, Making Calls and Answer Incoming Calls Making Calls 1.
GSM&PSTN FWT-8848 User's Manual Version 1.1 Warranty Card Please fill in the blanks carefully, and keep it properly as the voucher for warranty. Type of Equipment GSM FWT-8848 User’s name Contact with: Contact Tel.no.
