User's Manual

PROOF DIAGNOSTICS COVID-19 TEST SYSTEM
10 11
3. Fully open Cartridge door to expose
Cartridge porthole.
4. Write the Patient ID on the removable
label found on the Sample Vial pouch.
Remove and attach to the Vial.
5. Shake the Vial for 30 seconds
until the liquid inside the Vial is
uniformly colored.
6. Unscrew cap from the Vial.
7. Remove the Nasal Swab from
its packaging.
8. Insert the entire soft tip of the Swab
inside the nostril until the tip is no
longer visible. If the Swab meets with
any resistance, do not insert any
further. Firmly rotate the Swab in a
circular path against the nasal wall
2-3 times. Repeat in the other nostril
using the same Swab.
9. Place the Swab in the Vial and rotate
in liquid 5-6 times, against
the inner wall of the Vial, for about
10 seconds.
10. Remove the Swab from the Vial and
discard the Swab in a biohazard
waste bin.
js123
Patient ID