User's Manual

PROOF DIAGNOSTICS COVID-19 TEST SYSTEM
8 9
Basic Setup
• The Proof Lab should be placed on a dry, level surface with clear
access to a suitable power outlet.
• Make sure the workspace around the Proof Lab is kept clean and free
of contaminates.
Prepare Proof Lab
Prepare Patient
To run a test:
1. Remove the Test Cartridge
from the foil pouch. Place
on a at, clean, dry surface.
Write the patient details in
the Patient ID box on the
label. Do not touch, press or
write over the barcode.
2. Remove the pull tab from
the Cartridge and discard.
Place Proof Lab on a clean, dry surface. Firmly
insert the power cord into the power socket on
the Proof Lab. Connect the plug to your main
power outlet. Once connected, the Proof Lab will
automatically turn on.
The ring of LED lights on the Proof Lab will turn
solid white when the device is ready to run a test.
This is the Reader Ready State.
Instruct patient to gently blow their nose into a
tissue prior to test.
Discard tissue in a biohazard waste bin.
Running a Test
Before running a test, make sure:
• You have read and understood all of the instructions contained in
this User Manual including all safety warnings and cautions.
• You have powered on the Proof Lab, and it is ready to run a test
(see “Prepare Device” on page 8).
• You have everything required for the completion of the test, including:
– Proof Lab COVID-19 Test Kit
– COVID-19 Test Cartridge
– Nasal Swab
– Sample vial
– Exact volume transfer pipette
– Personal protective equipment
– Biohazard waste bin
– A suitable pen to write the patient ID on the Test Cartridge
and sample vial
1
X
X
X
X
X
H
e
a
l
t
h
C
a
r
t
r
i
d
g
e
P
o
u
c
h
js123