User's Manual

PROOF DIAGNOSTICS COVID-19 TEST SYSTEM
12 13
11. Pick up the Exact Volume Transfer
Pipette by the top bulb and squeeze
the top bulb rmly between your
forenger and thumb.
12. While still squeezing rmly on the top
bulb, fully submerge the Pipette tip
into the Vial liquid, so that Pipette tip is
near the bottom of Vial.
13. Gently release the top bulb to allow the
liquid to ll the Pipette stem. Note: It’s
normal and expected for excess uid to
ll the overow reservoir.
14. Insert Pipette stem into the
Cartridge porthole. Gently squeeze
the top bulb to dispense the liquid
into the Cartridge. Note: Liquid in
the excess reservoir does not need
to be dispensed.
15. Replace cap on Vial and retain
until the test has returned a
conclusive result.
16. Discard the Pipette in a biohazard
waste bin.
17. Close Cartridge porthole door.
You should hear an audible click
when closing it.
18. Open lid of the Proof Lab and
insert Cartridge. Push down on the
Cartridge until it can’t be pushed
down any further.
Overow
reservoir
click
!