User's Manual

Step 3: Access Point Conﬁguration

• Connect one end of the RJ45 Ethernet cable to the POE switch and other end to the

Ethernet port of the computer

• Ensure that the Network Connection is enabled on your computer

• Assign an IP address within the range (192.168.0.2-254) e.g. 192.168.0.10 to your

computer

• Management IP for the AP is 192.168.0.1

• To conﬁgure the AP, open a web browser in your computer and type the following

URL. http://192.168.0.1

• A login screen will appear. By default, the username of the AP is admin and password

is pronto. You can set desired password after logging into the AP

• Conﬁgure the AP, as you desire

• By default the AP will broadcast unsecured ESSID as Pronto. The AP has provision

to setup 4 ESSIDs and also to setup security for each one of them. Please refer the

detailed User Manual at www.prontonetworks.com

• Connect Internet back-haul to POE switch

• Connect your computer to default Pronto ESSID and access Internet

• Congratulations !! Your AP is conﬁgured successfully... Enjoy surﬁng Internet on Wi-Fi

For queries call: +1 925 860 6200 or mail to support@prontonetworks.com

or visit www.prontonetworks.com