User's Manual

Chapter 1.
Before you start to use the router.
Check those texts on and part of Router to know how to use it.
Parts:
Power Adapter: AC input 100~240Volts, 1Amp. DC output 12V, 1.5A.
Plastic Base: For Router body stand purpose. Put it into router body
fillister in the button side.
Antenna in the Router:
This antenna can be rotated 180 degree. From down side (line up to
the case) to the up side by clock reversing rotation when
you are looking it in back panel side.
Text:
POWER: DC Power socket, to be plug in from power adapter DC plug.
SW: Power switch.
RESET: Press one shot, the router will restart. Press and hold it more than
5 seconds, the router will return to default setting and restart.
WAN: For Ethernet external port.
LAN1~4: For Ethernet internal port.
USB1~2: For USB interface Printer or Flash disk, if you want to link to
small Hard Driver Disk, you should use 2 port both in the same
time. The limited current is 1.0A/5V. And the USB port version
is 2.0.