Instructions / Assembly

Rev. 2015
Attach reel to frame as shown (Figure 1) and (Figure 2). Go
through top hole of mower and frame tab and pin.
Roller brackets will change height of rear of mower. Use these to
level mower. A level mower will cut best.
Figure 1 Figure 2
Keep wing bolts tight to avoid hole wear and
mower tracking true.
(G) Attach to Power Unit.
Tongue top surface should be nearly level
when attached to power unit.
Attach wing to frame, tighten bolt secure,
snug as possible that allows wing to flex
with weight or reel. Oil connection.
Gold 3
-
No
Wings Used
Gold 5 - 2 Rear Wings Used
Gold 7 - 2 Front and 2 Rear
Wings Used
Gold 7 Pictured
A
B
B
A