User's Manual

58 Promote Control 3.15 User Manual Rev 23
© 2014 P romote Systems
8.3.45 Backlight B channel
Default: 16
Intensity of display backlight blue channel.
8.3.46 Backlight on any button
Default: Yes
Specifies whether Promote Control activates the display backlight when a button is pressed. When set to
"No", only the "Power" button turns the backlight on.
8.3.47 Remove backlight when exposing
Default: Yes
By default, Promote Controls automatically disables its display backlight before starting any exposure so
the backlight does not interfere with the camera exposure. If the display backlight is on when the "Start"
button is pressed, the backlight is automatically restored after all exposures are completed. Set this value
to "No" to keep the display backlight on even when exposures are in progress.
8.3.48 Global sound enable
Default: Yes
Promote Control has a number of audible notifications to help in your work. Setting this value to "No"
disables all audible notifications from Promote Control. You can fine tune which audible notifications are
active using the following settings.
8.3.49 Beep on every button
Default: No
Promote Control can make a sound every time any button is pressed. Set this value to "Yes" to make
every button press generate a sound.
8.3.50 Beep every second in manual hold mode
Default: Yes
Set this value to "No" to stop Promote Control from beeping every second the shutter is open in Manual
Hold mode.
37