User's Manual

Advanced Operations 57
© 2014 P romote Systems
default it will not change the behavior of Mode button (it will switch to the next mode). You can change
this setting to one of the modes you use the most often, if desired.
8.3.40 Down+Mode shortcut
Default: Default (next mode)
Choose a Promote Control to be activated when you hold Down button while pressing Mode button. By
default it will not change the behavior of Mode button (it will switch to the next mode). You can change
this setting to one of the modes you use the most often, if desired.
8.3.41 Center+Mode shortcut
Default: Default (next mode)
Choose a Promote Control to be activated when you hold Center button while pressing Mode button. By
default it will not change the behavior of Mode button (it will switch to the next mode). You can change
this setting to one of the modes you use the most often, if desired.
8.3.42 Backlight timeout
Default: 10 sec
Specifies the idle period after which the display backlight is powered off to conserve the batteries.
Choose "Infinite" to disable display backlight timeout. You may turn the display backlight on and off at any
time by briefly pressing the "Power" button.
8.3.43 Backlight R channel
Default: 10
Intensity of the display backlight red channel.
Promote Control’s liquid crystal display has an RGB color backlight. You can choose any color or intensity
for the display backlight by varying the intensity of the R (red), G (green), or B (blue) backlight
components.
Choosing a lower backlight intensity results in a longer battery life. To keep the current backlight color,
and vary only the backlight intensity, change the R, G, and B components proportionally until you obtain
the desired backlight intensity. Changing any component without changing the others changes the color.
Note that the button backlight color does not change.
8.3.44 Backlight G channel
Default: 16
Intensity of display backlight green channel.