Product manual

Step 7: Setting the IP Address

===========================================

CId Port Type IP Mask Gateway Link

===========================================

1 1 Mgmt 192.168.10.87 255.255.255.0 192.168.10.1 Up

1 1 iSCSI 192.168.10.88 255.255.255.0 192.168.10.1 Up

1 2 iSCSI 10.0.10.2 255.0.0.0 0.0.0.0 Down

6. Repeat steps 3 and 4 to set the other iSCSI port. Use -p 2 in place of -p 1.

To see the full set of CLI commands, at the admin@cli> prompt, type help and

press Enter.

This completes the Management and iSCSI Port setup. Go to “Step 8: Creating

Disk Arrays with WebPAM PROe” on page 24.