Product manual

Chapter 4: Management with WebPAM PROe
83
To view a list of recognized initiators:
1. Click the Subsystem icon in Tree View.
2. Click the Administrative Tools icon.
3. Click the Fibre Channel Management icon.
4. Click the Initiator tab in Management View.
A Fibre Channel switch will also display as an initiator in the list. If your Host
PC's Fibre Channel HBA is connected to the VTrak directly (not though a
Fibre Channel switch), the initiator will NOT display in the initiator list.
Adding an Initiator
To add an initiator to the VTrak’s initiator list:
1. Check the box to the left of the initiator.
2. Click the Add to Initiator List button.
The initiator appears under Storage Services. See page 87. You can then use the
initiator to create a LUN. See “Adding a LUN Map” on page 88.