Product manual

Chapter 5: Management with the CLU
193
Working with LUN Mapping
LUN Mapping includes the following functions:
• Viewing a List of Initiators (page 193)
• Enabling LUN Mapping (page 193)
• Creating an Initiator (page 193)
• Mapping a LUN to an Initiator (page 194)
• Deleting an Initiator (page 194)
Viewing a List of Initiators
LUN Mapping must be enabled in order for VTrak to recognize a Fibre Channel
or SAS initiator. To view a list of initiators:
1. From the Main Menu, highlight Additional Info and Management and press
Enter.
2. Highlight LUN Mapping and press Enter.
A list of the current initiators appears.
Enabling LUN Mapping
To enable LUN mapping:
1. From the Main Menu, highlight Additional Info and Management and press
Enter.
2. Highlight LUN Mapping and press Enter.
A list of the current Fibre Channel or SAS initiators appears.
LUN Mapping must be enabled in order for VTrak to recognize the initiator. If
LUN Mapping is currently disabled, highlight Enable LUN Mapping and press
Enter.
Creating an Initiator
You must add an initiator to the VTrak’s initiator list in order to use the initiator to
create a LUN. You can also add initiators under Fibre Channel Management see
page 183 or SAS Management, see page 185.
To create (add) a new initiator:
1. From the Main Menu, highlight Additional Info and Management and press
Enter.
2. Highlight LUN Mapping and press Enter.
3. Highlight Create New Initiator and press Enter.
4. Type the name of the initiator.