Product manual

Chapter 4: Management with WebPAM PROe
93
Locating an Enclosure
To locate an enclosure:
1. Click the Device tab.
2. Click the Component List icon.
3. Click the enclosure you want, then click the Locate button.
The enclosure LEDs blink for one minute.
Viewing Enclosure Information
To view enclosure information:
1. Click the Device tab.
2. Click the Component List icon.
3. Click the Enclosure and click the View button.
Enclosure information includes:
•Enclosure ID
• Enclosure Type
• Enclosure Warning Temperature Threshold
• Enclosure Critical Temperature Threshold
• Controller Warning Temperature Threshold
• Controller Critical Temperature Threshold
• Max Number of Controllers
• Max Number of Physical Drive Slots
• Max Number of Fans
• Max Number of Blowers
• Max Number of Temperature Sensors
• Max Number of Power Supply Units
• Max Number of Batteries
• Max Number of Voltage Sensors
For information on Enclosure problems, see “Diagnosing an Enclosure Problem”
on page 391.
Making Enclosure Settings
To make Enclosure settings:
1. Click the Device tab.
2. Click the Component List icon.
3. Click the Enclosure and click the Settings button.