Product manual

VTrak E-Class Product Manual
496
Additional Actions
• To view a list of a each type of component, tap the corresponding component
icon at the top of the screen.
• To view more information about a single component, tap the component in
the list.
• To locate the component in the VTrak subsystem, tap the Locate button
beside that component. The LEDs for that component blink for one minute.
See pages 377 through 379.
Diagnosing a Subsystem
To diagnose a problem on a VTrak subsystem:
1. Click the Home icon to go to the Home screen.
2. At the Home screen, check the icon for each VTrak subsystem:
• Green check icon – All components are OK
• Yellow ! icon – One or more components in Critical status
• Red ! icon – One or more components in Offline status
• No icon – Subsystem is shut down or its network connection is lost
Tap the VTrak subsystem with the Yellow ! icon or Red ! icon to go to
the Summary screen.
3. On the Summary screen, tap the Configuration icon to go to the
Configuration screen.
4. On the Configuration screen, check the icon for each component:
• Green check icon – Component is OK
• Yellow ! icon – Component is critical
• Red X icon – Component is offline
• Gray ? icon – Component is not present or no information is available
Tap the component with the Yellow ! icon or Red X icon to view more
information its condition.
Also see “Chapter 8: Troubleshooting” on page 375.