Product manual

VTrak E-Class Product Manual
282
3. Do one of the following actions:
• Highlight LUN Mapping: Initiators and press Enter. Then highlight an
initiator and press Enter.
• Highlight LUN Mapping: Ports and press Enter. Then highlight a port
and press Enter.
• Highlight LUN Mapping: Targets and press Enter. Then highlight a
target and press Enter.
A list of logical drives displays.
A list of logical drives displays.
4. In the LUN field, press the backspace key to erase the current value.
Leave the field blank.
5. Press Control-A to save the initiator, port, or target without a LUN map.
Changing the Active LUN Mapping Type
For FC systems, you can set up an Initiator or Port type LUN map.
For iSCSI systems, you can set up an Initiator or Target type LUN map.
You can set up both LUN map types on the same subsystem but only one LUN
map type can be active at a time.
To change the active LUN map type:
1. From the Main Menu, highlight Additional Info and Management and press
Enter.
2. Highlight LUN Mapping and press Enter.
3. Highlight Active LUN Mapping Type and press the Spacebar to toggle
between choices:
• FC subsystems, choose the Initiator or Port option.
• iSCSI subsystems, choose the Initiator or Target option.
4. Press Control-A to save your setting.