Product manual

VTrak E-Class Product Manual
270
The edited CHAP appears in the list.
Deleting iSCSI CHAPs
To delete an iSCSI CHAP:
1. From the Main Menu, highlight iSCSI Management and press Enter.
2. Highlight iSCSI CHAPs and press Enter.
3. Highlight the CHAP you want to delete and press Enter to mark it.
4. Highlight Delete Marked Entries and press Enter.
5. Press Y to confirm the deletion.
Pinging a Host or Server on the iSCSI Network
This function enables you to ping other network nodes through any one of the
VTrak’s iSCSI ports.
To ping a host or server on the network:
1. From the Main Menu, highlight iSCSI Management and press Enter.
2. Highlight Ping and press Enter.
3. Enter information as required:
• Highlight IP address and type the IP address you want to ping.
• Highlight Packet Count and enter the number of packets you want to
send.
• Highlight Ping Through Controller ID and choose a controller (1 or 2)
• Highlight Ping Through Port ID and choose a port number (1 to 4)
To change a value, highlight the item, press Backspace to delete the current
value and type a new value.
4. Highlight Ping and press Enter.
The results of the ping are displayed on the iSCSI Ping screen.
Viewing a List of iSCSI Trunks
A trunk is the aggregation of two or more iSCSI ports to increase bandwidth.
To view a list of iSCSI trunks:
1. From the Main Menu, highlight iSCSI Management and press Enter.
2. Highlight Trunk and press Enter.
The list of iSCSI Trunks displays.
• ID – ID number of the trunk. Starts at 1.
• CtrlId – RAID controller ID, 1 or 2
• Master Port – One of the four physical ports on the RAID controller