Product manual

Chapter 5: Management with the CLU
269
To view a list of iSCSI CHAPs:
1. From the Main Menu, highlight iSCSI Management and press Enter.
2. Highlight iSCSI CHAPs and press Enter.
A list of the current CHAPs appears. Information includes:
• ID – ID number. Numbering starts at 0.
• Type – Peer is one-way. Local is bi-directional.
• Name – Same as an alias.
Adding iSCSI CHAPs
Verify that CHAP authentication is enabled under “Making iSCSI Target Settings”
on page 260.
To add an iSCSI CHAP:
1. From the Main Menu, highlight iSCSI Management and press Enter.
2. Highlight iSCSI CHAPs and press Enter.
3. Highlight Create New CHAP Entry and press Enter.
4. Highlight Name and type a name for the CHAP.
5. Highlight Type and press the spacebar to toggle between Peer and Local.
Peer is one-way. Local is bi-directional.
6. Highlight Secret and type a secret of 12 to 99 characters.
7. Highlight Retype Secret and type the secret again to verify.
8. Highlight Save CHAP Record and press Enter.
The new CHAP is added to the list.
Making iSCSI CHAP Settings
When you change CHAP settings, you must change the secret. You cannot
change the type (peer or local).
To make iSCSI CHAP settings:
1. From the Main Menu, highlight iSCSI Management and press Enter.
2. Highlight iSCSI CHAPs and press Enter.
3. Highlight the CHAP you want to edit and press Enter.
4. Make changes as needed.
• Highlight Name and press the backspace key to erase the current value,
then type the new value.
• Highlight New Secret and type a secret of 12 to 99 characters.
• Highlight Retype New Secret and type the secret again to verify.
5. Highlight Save CHAP Record and press Enter.