Product manual

VTrak E-Class Product Manual
206
Initial Connection
Making an initial connection includes the following functions:
• Making a Serial Connection (page 206)
• Making a Telnet Connection (page 207)
• Making a SSH Connection (page 207)
• Logging Into the CLI (page 208)
• Accessing Online Help (page 209)
• Exiting the CLU (page 210)
• Logging Out of the CLI (page 210)
• Logging Back Into the CLI and CLU (page 210)
Making a Serial Connection
Before you begin, be sure the RJ11-to-DB9 serial data cable is connected
between the Host PC and VTrak, and that both machines are booted and
running.
Figure 1. Serial port on the controller
Then do the following actions:
1. Change your terminal emulation program settings to match the following
specifications:
• Bits per second: 115200
• Data bits: 8
• Parity: None
• Stop bits: 1
• Flow control: none
2. Start your PC’s terminal VT100 or ANSI emulation program.
Serial port