Product manual

Chapter 4: Management with WebPAM PROe
203
To ping a host or server on the network:
1. Click the Device tab.
2. Click the iSCSI Management icon.
3. Click the Ping tab.
4. Type the IP address of the host or server into the IP Address field.
5. Choose the port Type from the dropdown menu.
• iSCSI means an iSCSI port
• Mgmt means the VTrak’s virtual management port
6. If you chose iSCSI port, choose the RAID controller and port number from
the dropdown menus.
7. Type the number of packets you want to send in the Number of Package to
Ping field.
Four packets are commonly used for a ping.
8. Click the Start button.
In a few moments, the result displays under the Device tab as
Ping succeeded or Ping failed.