Product manual

VTrak E-Class Product Manual
94
Enclosure settings include:
• Enclosure Warning Temperature Threshold
• Enclosure Critical Temperature Threshold
• Controller Warning Temperature Threshold
• Controller Critical Temperature Threshold
4. In the field provided, type the temperature in degrees C for each threshold
value.
5. Click the Save button.
Viewing FRU VPD Information
FRU VPD refers to Vital Product Data (VPD) information about Field Replaceable
Units (FRU) in the enclosure. The number and type of FRU depends on the
subsystem model.
To view FRU VPD information:
To make Enclosure settings:
1. Click the Device tab.
2. Click the Component List icon.
3. Click the Enclosure and click the FRU VPD button.
Use this information when communicating with Technical Support and when
ordering replacement units. For contact information, see “Contacting
Technical Support” on page 435.
Viewing Power Supply Status
To view the status of the power supplies:
1. Click the Device tab.
2. Click the Component List icon.
3. Click the Enclosure and click the View button.
4. Scroll down to view the power supplies.
The screen displays the operational and fan status of VTrak’s two power
supplies. If any status differs from normal or the fan speed is below the
Healthy Threshold value, there is a fan/power supply malfunction. See
“Replacing a Power Supply” on page 323.
Viewing Fan Status
The fans are located on the power supplies.
To view the status of the power supply fans:
1. Click the Device tab.