Product manual
81
Web-based Management
Vtrak netwOrk management
The Network Management menu is used to congure settings for the Management Port and Maintenance Mode
IP settings. Select a VTrak node from the left panel to see the Network Management menu for that unit.
ConFigurE ManagEMEnt Port iP sEttings.
To congure settings for Maintenance Mode or Virtual Management Port, scroll over port you want to congure
and click on the Note icon that appears on the left end of the row. A new menu appears with the various settings.
Congure the port settings and click on the Save button.
Virtual Management Port settings are Enable, IP Address, Subnet Mask, Gateway IP Address, and DNS IP
Address.
Note that DHCP is supported only for VTrak E-Class storage nodes.
Maintenance Mode port settings are Controller ID, Enable, IP Address, Subnet Mask, Gateway IP Address
and DNS IP Address.
Note that DHCP is supported only for VTrak E-Class storage nodes.
VTrak Network Management menu