Product manual

71
Web-based Management
ChECking a FiLE systEM
To run a check of a File System, follow these steps:
1. Stop running the File System (see above).
2. Click on the Gear icon and select the Check File System option.
3. A pop-up menu that asks for conrmation that you want to continue to format the File System. Type
conrm and click on the Conrm button to begin running a check of the File System. This menu
includes the option to repair the File System after the checking is nished.
CLiEnt CoMPutEr List
Scroll down in the File System Detail menu to see a list of Client Computers allowed to access this File System
with the Status and IP Address of each client computer.
vtrak List
Scroll down in the File System Detail menu to see a list of VTrak Nodes used with this File System including the
Status and Model type.
View Client COmPuter inFOrmatiOn
To view basic information about clients computers connected to the SAN:
1. Go to the SAN menus (any tab).
2. Click on the Computers link in lower part of the left panel.
The basic information includes the client Status, IP Address, Operating System used and Client
Software Version.