Product manual
Network Setup
Next is the Network Setup dialog, where you can change the IP Address and other network parameters of the
A-Class, or skip this step leaving the default values.
Note that if you change the IP Address you will be prompted to conrm this action as you will have to point
your browser at that address to log back in again.
To ensure that the VTrak A-Class has internet access you may have to check with your network administrator
for some of the necessary conguration information.
Date and Time
Next is the Date and Time Setup dialog, where you can set the correct time, date and time zone.
After saving any changes you will have to log in again to continue the setup process.
License
Following this is the License Update dialog. Note that you must activate the license to create and use a le
system. Refer to the next section for detailed information on this process.
39
Setup