Product manual

winDows instaLLation
The following Windows versions are supported:
• Windows 2012 Server Standard R2 SP1 x86 64-bit
• Windows 2008 Server Standard R2 x86 64-bit
• Windows 2008 Server x86 64-bit
• Windows 7 SP1 x86 64-bit
• Windows 7 x86 64-bit
• Windows 8 x86 64-bit
Open a browser and enter the virtual management IP Address of the VTrak A-Class system: 10.0.0.1
Additional information on the IP Addresses can be found in “Specications” on page 13.
Download the VTrakFS Client application for your client using one of the methods on page 34, then go to the
download location and double-click the le to uncompress it. Opening the folder, note that there are installers for
the supported Operating System versions.
Double-click the le to uncompress it, and double-click the icon to begin the installation process. Note that it
will be necessary to restart the computer after installing the client application.
After the Windows client is added to the SAN, use the client application to mount the new SAN volume.
See “Using FS Client Software” on page 57 for more details on adding an A-Class SAN server and mounting
a VTrakFS volume on your client workstation.
36
VTrak A-Class Product Manual Promise Technologies